• Skip to primary navigation
  • Skip to main content
  • TTI Home
  • Roadside Safety & Physical Sec. Home
  • Contact Us
Texas A&M Transportation Institute logo
Roadside Safety and Physical Security

Design, Testing & Performance Evaluation

  • About
  • Groups
    • Center for Transportation Computational Mechanics
    • Infrastructure Protection Program
    • Proving Ground Support
    • Roadside Safety Program
  • Research Areas
  • Publications
  • People
  • News

Saving Lives

March 1, 2008

Living to tell about it — there’s nothing our researchers take more seriously

Nationally, in 2006, there were 5,973,000 police-reported motor vehicle crashes, which killed a total of 42,642 people — 3,475 right here in Texas.

Here are some sobering national numbers from 2006:

  • 13,470 people were killed in alcohol-impaired-driving crashes, nearly 32 percent of all crash-related deaths;
  • 61,000 pedestrians were injured in traffic crashes; 4,784 pedestrians were killed — down 12 percent from a decade prior; and
  • 4,810 motorcyclists were killed — a 5 percent jump in crash fatalities over 2005.

As startling as these statistics are, the numbers were much more alarming 60 years ago. In fact, thanks to the construction of the interstate highway system, the fatality rate on those roads is 60 percent lower than that of the rest of the roadway system. On the safety-research front, projects sponsored by the Texas Department of Transportation (TxDOT) and conducted at the Texas Transportation Institute (TTI) have produced numerous life-saving discoveries, such as the “breakaway” sign concept and specifications for improved safety of roadside structures. Through performance of countless crash tests over the last 50 years, Texas has led the way to implementation of safer signs, light and utility poles, medians, mailboxes and guardrails all across the nation.

A low-deflection life saver

Every day portable concrete traffic barriers are saving lives. They’re trucked to construction locations and set up quickly, and before long traffic is flowing in temporary lanes. Oncoming cars are kept safely apart and in their lane of travel.

Depending on the segment length used, the low-deflection precast concrete barrier developed and tested at TTI has only 18 to 24 inches of lateral movement during a design impact, putting it in a class by itself. In full-scale crash testing performed at TTI by the Roadside Safety Program, the low-deflection precast barrier proved exceptional at safely shrugging off the impact of a 4,409-pound pickup truck smashing into it at more than 60 miles per hour and 25 degrees. The barrier successfully contained the pickup, redirected it and kept it upright, all necessary criteria when evaluating safety and impact performance.

“Safety innovations like the low- deflection barrier make work zones safer for both motorists and construction personnel. Less deflection in an impact translates to more operating space for cars and workers. Ease of installation, inspection and repair reduces exposure of workers and minimizes traffic delays. If a car goes out of control while traveling through a work zone, this barrier is designed to save the lives of both the motorists and any workers in the area behind the barrier. That’s why we do this kind of work.”
Roger Bligh, TTI Research Engineer

Filed Under: Researcher articles

  • The State of Texas
  • Texas Homeland Security
  • Texas Veterans Portal
  • State Expenditure Database
  • Statewide Search
  • State Auditor’s Office Hotline
  • TAMUS Risk, Fraud & Misconduct Hotline
  • Site Policies
  • Open Records Policy
  • Statutorily Required Reports
  • TTI Rules
  • Veterans
  • Equal Opportunity
  • COVID-19 Info
  • Jobs
Member of the Texas A&M University System

© 2023 Copyright Statement / Legal Notices and Policies

Comments, suggestions, or queries? Contact us!

Texas A&M Transportation Institute · 3135 TAMU · College Station, Texas 77843-3135

(979) 317-2000